Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.

Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.

Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.

Dimensions du bloc: Ø 25 mm | Rond (polissage miroir extrême)

Épaisseur du matériau: 6mm

Valeurs standard de dureté: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Détails d’étalonnage: Les blocs étalon de dureté Micro Vickers d’INNOVATEST sont étalonnés et certifiés DUAL par UPI Laboratories, accrédité par le Conseil National d’Accréditation Néerlandais, et sont traçables aux normes nationales/internationales conformément à l’ISO 6507/3 & ASTM-E92 A4.

Environnement d’étalonnage: (23 ± 2) °C, < 70 %rh

Validité: Ce bloc étalon est valide pour l’échelle pour laquelle il a été étalonné. Il est recommandé de remplacer les blocs d’essai de dureté de référence tous les 5 ans. Les blocs en alliages d’aluminium ou de cuivre doivent être remplacés dans un délai de 2 à 3 ans.

Incertitude: L’incertitude élargie est basée sur une incertitude standard multipliée par un facteur (k=2), offrant un niveau de confiance d’environ 95 %. L’évaluation est réalisée selon les exigences internationales.

Traçabilité: Toutes les mesures sont traçables aux normes internationales applicables.

 

* La valeur de dureté est en dehors du champ d’application des normes ISO/ASTM en raison d’empreintes inférieures à 0,020 mm.
Des échelles ou valeurs de dureté différentes peuvent être commandées sur demande.

Blockgröße: 25 mm | Rund (extrem spiegelpoliert)

Materialstärke des Blocks: 6mm

Standard-Härtewerte: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Kalibrierungsdetails: INNOVATEST Mikro-Vickers-Härte-Kalibrierblöcke werden von UPI Laboratories kalibriert und doppelt zertifiziert. Das Labor ist von der niederländischen Akkreditierungsstelle (RvA) akkreditiert und die Kalibrierung ist rückführbar auf nationale/internationale Normen gemäß ISO 6507-3 & ASTM-E92 A4.

Kalibrierumgebung: (23 ± 2) °C, < 70 %rh

Gültigkeit: Dieser Referenzblock ist nur für die Härteskala gültig, für die er kalibriert wurde. Es wird empfohlen, Referenz-Härteprüfblöcke alle 5 Jahre auszutauschen. Blöcke aus Aluminium- oder Kupferlegierungen sollten innerhalb von 2 bis 3 Jahren ersetzt werden.

Messunsicherheit: Die erweiterte Unsicherheit basiert auf einer Standardunsicherheit, multipliziert mit einem Faktor (k=2), was einem Vertrauensniveau von ca. 95 % entspricht. Die Bewertung der Unsicherheit erfolgt gemäß internationalen Anforderungen.

Rückführbarkeit: Alle Messungen sind auf international anerkannte Normen rückführbar.

Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.

ブロックサイズ： 25mm | 円形（鏡面研磨仕上げ）

ブロックの厚さ： 6mm

標準硬さ値：: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

校正情報：: INNOVATEST製マイクロビッカーステストブロックは、オランダ認定機関（Dutch National Board of Accreditation）によって認定されたUPIラボラトリーズにより校正・二重認証されており、ISO 6507-3およびASTM-E92 A4に準拠した国家・国際基準へのトレーサビリティが確保されています。

校正環境：: (23 ± 2) °C, < 70 %rh

有効期限： このテストブロックは、校正されたスケールに対して有効です。テストブロックは、5年ごとの交換が推奨されます。アルミニウム合金および銅合金製のブロックについては、2～3年での交換が推奨されます。

不確かさ： 拡張不確かさは、標準不確かさにk=2の因子を掛けたもので、約95%の信頼水準を提供します。不確かさの評価は、国際基準に準拠して実施されます。

トレーサビリティ： すべての測定は、国際的に適用可能な標準にトレーサブルです。

Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.

Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.

Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.

Block size: 25mm | Round (Extreme Mirror Polished)

Block material thickness: 6mm

Standard hardness values: 40 / 70 / 100* / 150* / 200* / 250* / 300* / 350* / 400* / 450* / 500* / 550* / 600* / 650* / 700* / 750* / 800*

Calibration details: INNOVATEST Micro Vickers hardness calibration blocks are calibrated & DUAL-certified by UPI Laboratories, accredited by the Dutch National Board of Accreditation and are traceable to National/International standards according to ISO 6507/3 & ASTM-E92 A4.

Calibration environment: (23 ± 2) °C, < 70 %rh

Validity: This reference block is valid for the scale for which it was calibrated. It is recommended to replace reference hardness test blocks every 5 years. Blocks manufactured of Al-alloys and Cu-alloy, should be replaced within 2 to 3 years.

Uncertainty: The expanded uncertainty is based on a standard uncertainty multiplied by a factor (k=2), providing  a confidence level of approximately 95%. The evaluation of the uncertainty is carried out in accordance to International requirements.

Traceability: All measurements are traceable to international applicable standards.